MYTOL THERM 500 HEAT TRANSFER OILS operate over the broad temperature in the range of -6~C to 300~C and can be used in non-pressurised systems. A major advantage of liquid heat transfer is lower cost installation and operation capital cost is reduced by elimination of large diameter piping, safety valves, steam traps and water treatment facilities. Operating cost is reduced by low maintenance requirements and reduced make up.This indirect form of heating a system is widely used to achieve a better control and uniform distribution of heat.
MYTOL THERM 500 HEAT TRANSFER OILS is manufactured using special refining techniques and is recommended for any type of well designed heat transfer systems, operating upto 300~C maximum temperature.
MYTOL THERM 500 HEAT TRANSFER OILS is used for most conventional operations and finds extensive applications to the textiles, pharmaceuticals, chemicals and processing industries.
MYTOL THERM 500 HEAT TRANSFER OILS are specially developed for use in heat transfer industrial appplications. MYTOL THERM 500 HEAT TRANSFER OILS are fortified with compatible additives to render them most suitable for application in oil and/or coal fired and electrically heated circulating thermic fluid systems for process heat transfer.
MAIN PERFORMANCE FEATURES
Excellent heat transfer characteristic.
Excellent thermal and oxidation stability.
Low volatility and low vapour pressure to give long and trouble free service.
High flash point and higher initial boiling point ensure longer life heat transfer systems.
Non-corrosive and non-toxic.
Lower tendency towards formation of deposits on heat transfer surfaces.
TYPICAL PROPERTIES
TESTS
CONTROLS
Appearance
Bright Clear and Free from Suspend Impurities
Kinematic Viscosity, cST. @ 40oC
28 – 34.
Flash Point, (COC), oC Min.
200
Fire Point, (COC) oC Min
215
Pour Point, oC Max.
-6
Total Acidity mg KOH/gm Max.
0.1
Boiling Range oC 10%
335
Boiling Range oC 90%
370
TYPICAL VAPOUR PRESSURE DATA: 200 oCF
0.017MM HG (ABS)
TYPICAL VAPOUR PRESSURE DATA: 300 oCF
0.06 --,,--
TYPICAL VAPOUR PRESSURE DATA: 400 oCF
9.0 --,,--
TYPICAL VAPOUR PRESSURE DATA: 500 oCF
63 --,,--
TYPICAL VAPOUR PRESSURE DATA: 600 oCF
300 --,,--
HEALTH & SAFETY
MYTOL THERM 500 oils are unlikely to present any significant health or safety hazard when properly used in the recommended application and good standards of industrial and personal hygiene are maintained.
