MYTOL HONINGCUT it is recommended for honing of hardened steel where a high degree finish is desired. It could be widely used on transfer lines and steel liners.
DESCRIPTION
MYTOL HONINGCUT This oil is blended from specially refined low viscosity oils and fortified with selected fatty and chlorinated additives.
PERFORMANCE BENEFITS
MYTOL HONINGCUT oil * It improves surface finish. * Extends life of honing sticks/stones * Provides rapid flushing action * Improves shop hygiene viz-a-viz kerosene / turpentine. * Reduces fire hazard.
TYPICAL PROPERTIES
TESTS
CONTROLS
MYTOL HONING CUT
Appearance
Clear
Additives
Fat +
Chlorine
CU Strip Corrosion @ 100 o C for 3 hrs. Max.
1b *
Flash Point, (COC) 0 C Min.
90
Inorganic Acidity mg KOH/ gm
NIL
Kinemativ Viscosity, cSt. @ 400C
8 - 12
Specific Gravity @ 25 o C
0.846
HEALTH & SAFETY
MYTOL HONINGCUT oil is unlikely to present any significant health or safety hazard when properly used in the recommended application and good standards of industrial and personal hygiene are maintained.
