Rolling of metals is a process by which the thickness of the metal is reduced to the desired gauge by means of rolls in the mills. The technique of metal rolling largely depends upon the materials processed, equipment used and the operating conditions which also necessiate the use of wide range of rolling fluids with properties varying according to the type of metal and the conditions of rolling.
MYTOL ROLLOL is made from highly refined base oils and selected additives, emulsifiers etc. providing excellent chemical, thermal and oxidation stability.
MYTOL ROLLOL * Forms stable emulsion with water and enhances cooling function. * Results in increased roll life. * Provides good lubricity to the roll bearings.. * < not> * Improves surface finish
Pale Amber Colour
Acid Value mg KOH/gm Max.
Ash Content % Wt. Max.
Emulsion Stability Test
Flash Point, (COC) OC Min.
Kinematic Viscosity, cSt. @ 40Oc
28 – 42
PH (5% in distilled water)
Relative Density @ 29.5Oc
70 – 80
HEALTH & SAFETY
MYTOL ROLLOL oils are unlikely to present any significant health or safety hazard when properly used in the recommended application and good standards of industrial and personal Hygiene are maintained.