MYTOL DEMOULD OIL is recommended for use in mould release of asbestos sheets and/or slates.
MYTOL DEMOULD OIL can be applied by spraying or by brush.
DESCRIPTION
APPLICATION
MYTOL DEMOULD OIL is manufactured using highly refined base oils and additives. such as corrosion inhibitor.
MYTOL DEMOULD OIL ensures : * Smooth release of material from mould. * Provides effective protection against rust and corrosion of mould * Provides smooth operation and long life of mould. * Ensures proper surface finish.
TYPICAL PROPERTIES
TESTS
CONTROLS
KINEMATIC VISCOSITY (CST) @40 oC
18.7
KINEMATIC VISCOSITY (CST) @100 oC
3.2
FLASH POINT, DEG C., (PMCC)
162
SAPONIFICATION VALUE, MG KOH/G
0.72
OXIDATION STABILITY
30 Hrs
HEALTH & SAFETY
MYTOL DEMOULD OIL is unlikely to present any significant health or safety hazard when properly used in the recommended application and good standards of industrial and personal hygiene are maintained.
